Pneuparts air units, 3-piece, G 1", 0.2 - 4 bar, series 4

Version: 
Filter, self-relieving pressure regulator, with attached lubricator 

Materials: 
Body: Grivory®, spring hood: POM, diaphragms and seals: NBR, container: Polycarbonate 

Temperature range: 
-10°C to max. +50°C 

Input pressure: 
1.5 - 16 bar (model series 0: 1.5 - 12 bar) 

Condensate draining: 
semi-automatic** 

Pressure gauge connection: 
G 1/4" 

Pore width in the filter: 
5 µm 

Media: 
Compressed air, neutral gases 

Advantages: 
•Automatic venting in the event of overpressure on the secondary side, •Easy assembly of individual components using coupling kits within a model series, •Hand wheel can be locked by pressing down on it and bolted with a lock - please use the VHS 20, •Semi-automatic oil filling by attaching a hose to the bottom on the oil bowl (G 1/8"). When the oil fill button is pressed, oil from the container will be sucked through the hose (not model series 0). 

Max. condensate amount: 
87 cm³ 

Switch panel thread: 
M 50 x 1,5 

Scope of delivery: 
Air unit, including 50 mm pressure gauge 

Own air consumption: 
Max. 1,5 l/min 

Oil metering at 1000 l/min: 
approx. 1 - 2 drops/min 

Oil supply: 
181 cm³ 

Lubricator reaction limit (at 6 bar): 
115 l/min 

ATEX: 
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU 

Optional: 
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed without pressure (0 - 16 bar) -AMNC

*standard series, please use in preference, as the regulation range is universally applicable, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight.