Rotary joint G 1 1/4"-G 3/4", shaft tube G 1 1/4"-31mm

Description

Suitable:

Rotary joint for combined supply and drainage. The inner tube* sticks out into the drum to be supplied with the medium and takes over the drainage of the supplied medium. These rotary joints are suitable for use of non-contaminated water, heat transfer oil and saturated steam (intermittent). Alternatively, the units can be equipped with a special seal for aggressive, abrasive media and contaminated water.

 

Advantages:

The springs are external to the media flow in order to minimise the loss of pressure and avoid turbulence.

 

Materials:

Housing: Brass, optional: stainless steel, seal: Carbon graphite / Tungsten carbide

 

Temperature range:

Water up to max. +175°C, saturated steam up to max. +140°C, heat-transfer oil up to max. +200°C

 

Operating pressure:

Water: G 3/8" to G 1 1/2" max. 50 bar, G 2" max. 40 bar Saturated steam: max. 3 bar, heat transfer oil: max. 6.5 bar

 

Optional:

Version in stainless steel -ES, seal package for abrasive media or unclean water -AB

 

Warning:

Maximum pressure and speed values may not occur simultaneously. If in doubt, please ask us for confirmation. A fluid pressure of over 8 bar is only permitted when used with cooling water and a maximum temperature of +50°C. For heat transfer oil with temperatures over +175°C, the speed may not exceed 300 rpm. For reverse operation, shafts with flanges are to be used.

 

Warning:

Take note of left and right-handed threads. Left-handed thread for feeding into clockwise rotating drums. Right-handed thread for feeding into counter-clockwise rotating drums.

 

*inner tube not included in the scope of delivery

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.