Standard air units, 2-piece., G 3/4", 0.5 - 10 bar

Materials:

Body: die-cast zinc Z410 (model series 5 to 8: aluminium), diaphragms and seals: NBR, container: polycarbonate

 

Temperature range:

-10°C to +60°C

 

Input pressure:

1.5 - 16 bar

 

Condensate draining:

semi-automatic**

 

Media:

Compressed air, non-toxic and non-inflammable gases

 

ATEX:

Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

 

Advantages:

•automatic venting in the event of overpressure on the secondary side, •can be filled with oil while under pressure

 

Version:

Self-relieving filter regulator (with relieving) with attached lubricator

 

Pressure gauge connection:

G 1/4"

 

Switch panel thread:

Model series 1 to 3: M 20 x 1.5

 

Oil metering at 1000 l/min:

1 - 2 drops/min

 

Optional:

Other regulation range 0.5-16 bar -16, Version with protective cage -S, Version with metal bowl* (1.5 - 25 bar) -M, automatic discharge*** (1.5 - 16 bar) -AM, automatic discharge closed when not pressurised*** (0 to 16 bar) -AMNC

 

*metal/glass combination drip cap, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight., ***not for model series 1, when combined with a metal bowl 16 bar max.

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.